CLASS="SECT1" BGCOLOR="#FFFFFF" TEXT="#000000" LINK="#0000FF" VLINK="#840084" ALINK="#0000FF" >

8. Using Linux NFS with Other OSes

Every operating system, Linux included, has quirks and deviations in the behavior of its NFS implementation -- sometimes because the protocols are vague, sometimes because they leave gaping security holes. Linux will work properly with all major vendors' NFS implementations, as far as we know. However, there may be extra steps involved to make sure the two OSes are communicating clearly with one another. This section details those steps.

In general, it is highly ill-advised to attempt to use a Linux machine with a kernel before 2.2.18 as an NFS server for non-Linux clients. Implementations with older kernels may work fine as clients; however if you are using one of these kernels and get stuck, the first piece of advice we would give is to upgrade your kernel and see if the problems go away. The user-space NFS implementations also do not work well with non-Linux clients.

Following is a list of known issues for using Linux together with major operating systems.

8.1. AIX

8.1.1. Linux Clients and AIX Servers

The format for the /etc/exports file for our example in Section 3 is:
  /usr   slave1.foo.com:slave2.foo.com,access=slave1.foo.com:slave2.foo.com
  /home  slave1.foo.com:slave2.foo.com,rw=slave1.foo.com:slave2.foo.com
    

8.1.2. AIX clients and Linux Servers

AIX uses the file /etc/filesystems instead of /etc/fstab. A sample entry, based on the example in Section 4, looks like this:
/mnt/home:
        dev             = "/home"
        vfs             = nfs
        nodename        = master.foo.com
        mount           = true
        options         = bg,hard,intr,rsize=1024,wsize=1024,vers=2,proto=udp
        account         = false
  

  1. Version 4.3.2 of AIX, and possibly earlier versions as well, requires that file systems be exported with the insecure option, which causes NFS to listen to requests from insecure ports (i.e., ports above 1024, to which non-root users can bind). Older versions of AIX do not seem to require this.

  2. AIX clients will default to mounting version 3 NFS over TCP. If your Linux server does not support this, then you may need to specify vers=2 and/or proto=udp in your mount options.

  3. Using netmasks in /etc/exports seems to sometimes cause clients to lose mounts when another client is reset. This can be fixed by listing out hosts explicitly.

  4. Apparently automount in AIX 4.3.2 is rather broken.

8.2. BSD

8.3. Tru64 Unix

8.3.1. Tru64 Unix Servers and Linux Clients

In general, Tru64 Unix servers work quite smoothly with Linux clients. The format for the /etc/exports file for our example in Section 3 is:
     
/usr         slave1.foo.com:slave2.foo.com \
     -access=slave1.foo.com:slave2.foo.com \

/home        slave1.foo.com:slave2.foo.com \
         -rw=slave1.foo.com:slave2.foo.com \
       -root=slave1.foo.com:slave2.foo.com 
   

(The root option is listed in the last entry for informational purposes only; its use is not recommended unless necessary.)

Tru64 checks the /etc/exports file every time there is a mount request so you do not need to run the exportfs command; in fact on many versions of Tru64 Unix the command does not exist.

8.4. HP-UX

8.5. IRIX

8.5.1. IRIX Servers and Linux Clients

A sample /etc/exports entry on IRIX looks like this:
/usr -ro,access=slave1.foo.com:slave2.foo.com
/home -rw=slave1.foo.com:slave2.fo.com:root=slave1.foo.com:slave2.foo.com
  
(The root option is listed in the last entry for informational purposes only; its use is not recommended unless necessary.)

There are reportedly problems when using the nohide option on exports to linux 2.2-based systems. This problem is fixed in the 2.4 kernel. As a workaround, you can export and mount lower-down file systems separately.

As of Kernel 2.4.17, there continue to be several minor interoperability issues that may require a kernel upgrade. In particular:

8.6. Solaris

8.6.1. Solaris Servers

Solaris has a slightly different format on the server end from other operating systems. Instead of /etc/exports, the configuration file is /etc/dfs/dfstab. Entries are of the form of a share command, where the syntax for the example in Section 3 would look like
share -o rw=slave1,slave2 -d "Master Usr" /usr
   
and instead of running exportfs after editing, you run shareall.

Solaris servers are especially sensitive to packet size. If you are using a Linux client with a Solaris server, be sure to set rsize and wsize to 32768 at mount time.

Finally, there is an issue with root squashing on Solaris: root gets mapped to the user noone, which is not the same as the user nobody. If you are having trouble with file permissions as root on the client machine, be sure to check that the mapping works as you expect.

8.7. SunOS

SunOS only has NFS Version 2 over UDP.

8.7.1. SunOS Servers

On the server end, SunOS uses the most traditional format for its /etc/exports file. The example in Section 3 would look like:
/usr    -access=slave1.foo.com,slave2.foo.com
/home   -rw=slave1.foo.com,slave2.foo.com, root=slave1.foo.com,slave2.foo.com
   

Again, the root option is listed for informational purposes and is not recommended unless necessary.