| Securing and Optimizing Linux: RedHat Edition -A Hands on Guide | ||
|---|---|---|
| Prev | Chapter 33. Why's and When's of Backup and Restore | Next |
It's interesting to use the dump backup program if you want to take advantage of its several levels of backup procedures. Given below is a procedure to have a longer backup history and to keep both the backup and restore times to a minimum. In the following example, we assume that the backup is written to a tape drive named /dev/st0 and we backup the home directory /home of our system.
It is important to always start with a level 0 backup, for example:
Friday 1. use tape 1 for the first full backup.
[root@deep] /# dump -0u -f /dev/st0 /home |
DUMP: Date of this level 0 dump: Fri Jan 28 21:25:12 2000 DUMP: Date of last level 0 dump: the epoch DUMP: Dumping /dev/sda6 (/home) to /dev/st0 DUMP: mapping (Pass I) [regular files] DUMP: mapping (Pass II) [directories] DUMP: estimated 18582 tape blocks on 0.48 tape(s). DUMP: Volume 1 started at: Fri Jan 28 21:25:14 2000 DUMP: dumping (Pass III) [directories] DUMP: dumping (Pass IV) [regular files] DUMP: DUMP: 18580 tape blocks on 1 volumes(s) DUMP: finished in 4 seconds, throughput 4645 KBytes/sec DUMP: Volume 1 completed at: Fri Jan 28 21:25:18 2000 DUMP: Volume 1 took 0:00:04 DUMP: Volume 1 transfer rate: 4645 KB/s DUMP: level 0 dump on Fri Jan 28 21:25:12 2000 DUMP: DUMP: Date of this level 0 dump: Fri Jan 28 21:25:12 2000 DUMP: DUMP: Date this dump completed: Fri Jan 28 21:25:18 2000 DUMP: DUMP: Average transfer rate: 4645 KB/s DUMP: Closing /dev/st0 DUMP: DUMP IS DONE |
Monday. use tape 2 for the incremental backups.
[root@deep] /# dump -3u -f /dev/st0 /home |
Tuesday. use tape 3 for the incremental backups.
[root@deep] /# dump -2u -f /dev/st0 /home |
Wednesday. use tape 4 for the incremental backups.
[root@deep] /# dump -5u -f /dev/st0 /home |
Thursday. use tape 5 for the incremental backups.
[root@deep] /# dump -4u -f /dev/st0 /home |
Friday 2. use tape 6 for the incremental backups.
[root@deep] /# dump -7u -f /dev/st0 /home |
Monday. use tape 2 for the incremental backups.
[root@deep] /# dump -3u -f /dev/st0 /home |
Tuesday. use tape 3 for the incremental backups.
[root@deep] /# dump -2u -f /dev/st0 /home |
Wednesday. use tape 4 for the incremental backups.
[root@deep] /# dump -5u -f /dev/st0 /home |
Thursday. use tape 5 for the incremental backups.
[root@deep] /# dump -4u -f /dev/st0 /home |
Friday 3. use tape 7 for the incremental backups.
[root@deep] /# dump -6u -f /dev/st0 /home |
Monday. use tape 2 for the incremental backups.
[root@deep] /# dump -3u -f /dev/st0 /home |
Tuesday. use tape 3 for the incremental backups.
[root@deep] /# dump -2u -f /dev/st0 /home |
Wednesday. use tape 4 for the incremental backups.
[root@deep] /# dump -5u -f /dev/st0 /home |
Thursday. use tape 5 for the incremental backups.
[root@deep] /# dump -4u -f /dev/st0 /home |
Friday 4. use tape 8 for the incremental backups only if there have five Fridays in one month.
[root@deep] /# dump -9u -f /dev/st0 /home |
Monday. use tape 2 for the incremental backups only if there have five Fridays in one month.
[root@deep] /# dump -3u -f /dev/st0 /home |
Tuesday. use tape 3 for the incremental backups only if there have five Fridays in one month.
[root@deep] /# dump -2u -f /dev/st0 /home |
Wednesday. use tape 4 for the incremental backups only if there have five Fridays in one month.
[root@deep] /# dump -5u -f /dev/st0 /home |
Thursday. use tape 5 for the incremental backups only if there have five Fridays in one month.
[root@deep] /# dump -4u -f /dev/st0 /home |
Month. use another tape for a new full backup when the month change.
[root@deep] /# dump -0u -f /dev/st0 /home |
Where
-0 to -9 is the backup level option you want to use,
the u option means to update the file /etc/dumpdates after a successful dump,
The -f option to write the backup to file
special device file like /dev/st0, a tape drive,
/dev/rsd1c, a disk drive,
An ordinary file
the standard output.
You can see that we use the same tapes 2 to 5 for daily backups -Monday to Thursday = 4 tapes, tapes 6, 7, and 8 for weekly backups -other Fridays, 6 + 7 + 8 = 3 tapes. note that there can be five Fridays in one month and tapes 1 and any subsequent new one for monthly backups -first Friday each month, 1 + any subsequent 11 months = 12 tapes. In conclusion, if we use 8 tapes 4 + 3 + 1 = 8, we can have a full backup for one month and repeat the procedure with the 8 tapes to get our subsequent 11 months to come for a total of 1-year individual full backups.
The full backup should be done at set intervals, say once a month, and on a set of fresh tapes that are saved forever. With this kind of procedure, you will have 12 tapes for 12 months that handle histories and changes of your system for one year. Later, you can copy the 12 tape backups onto a different computer designated to keep all yearly backups for a long time and be able to reuse them, 12 tapes, to repeat the procedure for a new year.